|
FAQ Search
Distributor Locator
Careers
Employee Login
|
|
 |
WB100
SERIES |
TRADITIONAL
TIME PIECES
|
| When
you’re installing a timer for the first and last time,
Paragon’s WB100 Series is your timer of choice. This series of
In-Wall Programmable Time Controls is designed for installation in
standard, single-gang, or 2-gang electrical wall boxes, and meets
ASHRAE, state ventilation and indoor air quality standards for
automatically controlling residential and commercial ventilation
fans.
WB100’s
24-hour control protects homeowners from prowlers while they are
away by automatically turning lights ON and OFF, giving the home a
lived-in look. When the automatic timer is unnecessary, a manual
override switch allows the control to be set ON, OFF or AUTO.
|
|
|
FEATURES
& BENEFITS
 |
Fast,
easy installation saves contractors time and money. |
|
The
24-hour dial is divided into 72 separate 20-minute
increments. |
|
Easily
replaces a standard single-pole, single-throw toggle switch. |
|
|
AM/PM
dial format allows for maximum settings flexibility. |
|
Each
20-minute increment is easily set by captive pins. |
|
UL
and CSA listed means quality and durability are built into
every time control. |
|
|
PHYSICAL
1-1/4” deep to fit into standard single-gang or 2-gang electrical
wall box. Each unit is provided with 3 color coded lead wires,
white wall plate, and mounting screws.
ENVIRONMENTAL
Operating temperature range -40°F (-40°C) to 180°F (85°C)
Operating Humidity 0–95% RH non-condensing
The Paragon in-wall programmable time control should be mounted
indoors in an area that is free of excessive contaminants such as
oil, grease, dirt, etc.
|
ELECTRICAL
SPECIFICATIONS
Contacts
SPST, 20A @ 120 Vac, 60 Hz
2400 W Resistive, 8A Inductive
1350 W Tungsten, 1 Hp @ 120 Vac
HOW
TO SPECIFY
Installer shall furnish and install Paragon In-wall programmable
time control. Unit shall have the capability of being programmed
for up to 36 ON/OFF cycles per 24 hour period. ON or OFF time
increments are in 20 minute segments. An off-on-auto override
switch shall be provided for manual control. Control shall mount
into a standard single-gang or 2-gang, 2-1/2” deep electrical
wall box. Control contact ratings to be 20A resistive, 8A inductive
1 HP @ 120 Vac.
|
|
|
| DIMENSIONS
|
|
|
TYPICAL WIRING
DIAGRAMS
|
|
