Invensys


Invensys Controls Americas


Publication Zone

FAQ Search

Distributor Locator

Careers

Employee Login









Our Quad Controls give you 4 outstanding features in state-of-the-art timed switch controls. You get 24-hour, 7-day, 365-day control, and AstroDial SunTracker™ in a single unit. They are available with 1 to 12 SPDT relays and in NEMA 1 drawn steel enclosures for indoor use. Quad Controls . . . doing what you need today.

Paragon exclusiveNo Batteries to Change Minimum 96 hours of battery-free carry-over protects against power outages.

Respond to Environmental Conditions 32 sensor events automatically detect external changes and augment time control capabilities.

Meet Your Sophisticated Needs Up to 128 ON/OFF events accommodate all your scheduling requirements.

Automatic Daylight Savings Time Feature Clocks don’t have to be reset for seasonal changes.

Leap Year Adjustment Units automatically adjust daily schedule to stay in sync with calendar.

AstroDial SunTracker™ Devices Don’t require additional photocell and associated maintenance.

Worry-free Holiday Programming 30 holiday durations or 10 holiday durations make schedule variations hassle-free.

Convenient Remote Programming You can modify the program quickly and easily from a laptop or desktop computer.

Precise Control 4 user-defined duty cycles and durations are available from 1 second to 23 hours, 59 minutes, 59 seconds.

Consolidate Programming You can synchronize multiple time controls with a single unit.

Independently Switched Circuits Multiple load control where any of the 1 to 12 SPDT relays can switch togather or with their own independent schedules allowing a single control to replace several.

 

EL712

• 12 SPDT relays
• 8 external inputs allow sensors (see accessories) to automatically adjust to changes in environmental conditions
• Lithium battery provides 1 year of carry-over for extra protection
with capacitor
• RS-232 port and Pecosoft.EL software are available for convenient remote programming (see accessories)
• Stagger-up feature turns loads ON separately after power outages to prevent power surges
• Title 24 certified
• Unit dimensions are 14-5/16” W x 15-1/8” H x 6-1/8” D

[VIEW SPECIFICATION & MANUAL]

 

EL78

• 8 SPDT relays
• 8 external inputs allow sensors (see accessories) to automatically adjust to changes in environmental conditions
• Lithium battery offers 1 year of backup power with capacitor
• Easy remote programming with RS-232 port and Pecosoft.EL software (see accessories)
• Stagger-up feature turns loads ON independently after power returns to avoid power surges
• Title 24 certified
• Unit dimensions are 14-5/16” W x 15-1/8” H x 6-1/8” D

[VIEW SPECIFICATION & MANUAL]

EL74

• 4 SPDT relays
• 4 external inputs allow sensors (see accessories) to automatically adjust to changes in environmental conditions
• 1 year of carry-over available with lithium battery and capacitor
• RS-232 port and Pecosoft.EL software provide remote programming capabilities (see accessories)
• Stagger-up feature activates loads separately after power outages to protect against power surges
• Title 24 certified
• Unit dimensions are 7-3/8” W x 10-7/8” H x 3-1/2” D

[VIEW SPECIFICATION & MANUAL]

 

EL72

• 2 SPDT relays
• 2 external inputs allow sensors (see accessories) to automatically read changes in environmental conditions and adjust to set program
• Simple remote programming is available with Pecosoft.EL software and CIM1 Adaptor (see accessories)
• Loads turn ON independently after power outages to guard against power surges
• Also available in NEMA 3R non-metallic enclosure for outdoor use
• Title 24 certified
• Unit dimensions are 6-9/16” W x 9” H x 3-7/8” D

[VIEW SPECIFICATION & MANUAL]

EL71

• 1 DPDT relay
• 2 external inputs allow sensors (see accessories) to automatically adjust to environmental conditions
• Pecosoft.EL software and CIM1 Adaptor provide convenient remote programming capabilities (see accessories)
• Also available in NEMA 3R non-metallic enclosure for outdoor use
• Title 24 certified
• Unit dimensions are 4-1/4” W x 7-7/8” H x 3” D

[VIEW SPECIFICATION & MANUAL]

ACCESSORIES

CIM1 Adaptor
• Permits 2-way communication between a computer and models EL71 and EL72.
• Software allows the user to program and monitor the time control from a PC

* Not needed on EL74, EL78, or EL712

TS3-OAT (Outdoor Thermal Sensor)
• Sealed outdoor sensor needs only a 3 conductor shielded cable for power and signal

• Linear output varies between 0 and approximately 5 volts
• Sensors accurary is ±4°F at room temperature
• Unit comes in a watertight case

LS-R (Light Sensor)
• Water tight solid-state light sensor for indoor and outdoor use

• Requires only a 3 conductor shielded cable
• Operating temperature from -40°F to 167°F
• 1.5F resolution with 0-300 foot candle range 
• Linear output voltage between 0 and 5 volts

TS3-SAT (Indoor Thermal Sensor)
• User selectable calibrated readout of fahrenheit, centigrade, or customized relative scale
• Tamper-proof indoor sensor requiring only a 3 conductor shielded cable 
• Linear output voltage between 0 and 5 volts

Pecosoft.EL
• Software is used to program and review
any EL series control from a computer

TECHNICAL INFORMATION
HOW TO SPECIFY

Installer shall furnish and install . . .

EL712   with 12 SPDT
EL78     with 8 SPDT
EL74     with 4 SPDT
EL72     with 2 SPDT
EL71     with 1 DPDT

Timekeeping Capabilities

The control shall have 4 distinct programming capabilities and be utilized as a 24-hour, 7-day, 365-day and AstroDial SunTracker™ time control with automatic daylight savings time adjustment.

Programming Attributes and Capabilities

Events/Set Points
The control shall provide for 128 user-defined events and 4 user-defined durations and 4 user-defined duty cycles.

Holidays
The control shall have 6 pre-programmed holidays with 30 user-defined holidays, which includes 10 user-defined holidays, 10 user-defined holidays of the month and 10 user-defined holiday durations.

Override
The control shall provide keyboard toggle override as well as remote override in timed, toggle or enabled styles.

Sensory Inputs*
The control shall have 32 events and . . .


EL712   8 external inputs
EL78     8 external inputs
EL74     4 external inputs
EL72     2 external inputs
EL71     2 external inputs

Hardware Attributes

Carry-over
The control shall provide a minimum of 96 hours carry-over without a battery and 8,760 hours with a battery.

Display
The clock format shall be selectable 12-hour (civilian) or 24-hour (military) format on a
2-5/8” x 3/4” inch display.

Interface
The control shall interface with a PC.

Enclosure*
Control shall be housed in a . . .

NEMA 1 steel or
NEMA 3R non-metallic lockable tamper resistant enclosure with clear-view cover

*See product comparison table for specific variations.

Model No. Quantity/
Switch
Type
Hp Amp Wiring
Diag.#
AC Line Enclosure Material Enclosure
Type
Type of Mount Dimensions Shipping Wgt.
Volts W H D Lb. Kg.

QUAD CONTROLS

EL712 12-SPDT 1-2* 20 7,8 24,120,208-240,277 Metal (indoor) NEMA 1 Enclosure mount 14-5/16" 15-1/8" 6-1/8" 18 8
EL78 8-SPDT 1-2* 20 7,8  24,120,208-240,277 Metal (indoor) NEMA 1 Enclosure mount 14-5/16" 15-1/8" 6-1/8" 18 8
EL74 4-SPDT 1-2* 20 5,6 24,120,208-240,277 Metal (indoor) NEMA 1 Enclosure mount 7-3/8" 10-7/8" 3-1/2" 7 3.2
EL72/120V 2-SPDT 1 20 3,4 120 Metal (indoor) NEMA 1 Enclosure mount 6-9/16" 9" 3-7/8" 2 0.9
EL72/208-240V 2-SPDT 2 20 3,4 208-240 Metal (indoor) NEMA 1 Enclosure mount 6-9/16" 9" 3-7/8" 2 0.9
EL72/277V 2-SPDT 2 20 3,4 277 Metal (indoor) NEMA 1 Enclosure mount 6-9/16" 9" 3-7/8" 2 0.9
EL72PC/120V 2-SPDT 1 20 3,4 120 Non-metallic with clear-view cover (indoor/outdoor) NEMA 3R Enclosure mount 6-9/16" 9" 3-7/8" 2-1/2" 1.1
EL72PC/208-240V 2-SPDT 2 20 3,4 208-240 Non-metallic with clear-view cover (indoor/outdoor) NEMA 3R Enclosure mount 6-9/16" 9" 3-7/8" 2-1/2" 1.1
EL72PC/277V 2-SPDT 2 20 3,4 277 Non-metallic with clear-view cover (indoor/outdoor) NEMA 3R Enclosure mount 6-9/16" 9" 3-7/8" 2-1/2" 1.1
EL71/120V 1-SPDT 1 20 1,2,4 120 Metal (indoor) NEMA 1 Enclosure mount 4-1/4" 7-7/8" 3" 2 0.9
EL71/208-240V 1-SPDT 2 20 1,2,4 208-240 Metal (indoor) NEMA 1 Enclosure mount 4-1/4" 7-7/8" 3" 2 0.9
EL71/277V 1-SPDT 2 20 1,2,4 277 Metal (indoor) NEMA 1 Enclosure mount 4-1/4" 7-7/8" 3" 2 0.9
EL71PC/120V 1-SPDT 1 20 1,2,4 120 Non-metallic with clear-view cover (indoor/outdoor) NEMA 3R Enclosure mount 4-1/4" 7-7/8" 3" 2-1/2" 1.1
EL71PC/208-240V 1-SPDT 2 20 1,2,4 208-240 Non-metallic with clear-view cover (indoor/outdoor) NEMA 3R Enclosure mount 4-1/4" 7-7/8" 3" 2-1/2" 1.1
EL71PC/277V 1-SPDT 2 20 1,2,4 277 Non-metallic with clear-view cover (indoor/outdoor) NEMA 3R Enclosure mount 4-1/4" 7-7/8" 3" 2-1/2" 1.1

*Hp rating dependant on voltage chosen

Go to top

© Copyright 1999-2007 Invensys Controls. All rights reserved.
Privacy Policy • Legal Information